15 -16 MAY 2019, ExCel LONDON

Organised by

15 -16 MAY 2019
ExCel LONDON

Six solutions for accessibility challenges

6 solutions to accessibility challenges

With more than 13 million disabled people in the UK, addressing accessibility issues is now more crucial than ever for architects, specifiers and building managers. With a plethora of solutions on the market to help solve these challenges, here are just some to consider (and the standards you need to be aware of):

  1. Traditional passenger lift – a range of sizes suitable for a wide range of users which will meet the accessibility requirements of the Building Regulation Approved Document M and BS EN 81-70.
  2. So-called “slow speed lifts” – essentially a passenger lift with fully enclosed car and automatic controls but with a low travelling speed limited to 0.15 m/s (so most suitable for rises of 2-3 floors and lighter usage). This type is especially useful where pit depth and headroom is limited.
  3. Enclosed lifting platform – these are operated by constant pressure controls which requires the user to hold down a control button as required by the product standard BS EN 81-41.
  4. Non-enclosed lifting platform – ideal for travelling a short distance and are intended primarily for the transport of persons with impaired mobility, with or without a wheelchair. Design requirements and guidance on application are included in BS 6440.
  5. Inclined platform stairlift – this needs careful assessment of the strength of the stair and of the wall that it is fixed to.
  6. Stairlift – with chair for installation on either straight or curved stairs. BS EN 81-40 specifies requirements and provides guidance on application for both types of stairlift.

Points to consider

Whilst the ever-evolving choice of products available is positive news, there are several issues to consider. LEIA advises to use the following checklist when selecting products:

  • Make sure they are compliant with building regulations where applicable.
  • Make sure they are compliant with product safety standards – these are listed above.
  • Make sure the company you are using is a LEIA member. Our members are required to have quality system to ISO 9001 and health and safety systems to OSHAS 18001/ ISO 45001.  They also have access to LEIA support on a range of standards and regulations and educational resources.
  • Check energy efficiency – this is an important area if you are looking for BREEAM credentials on larger buildings using lifts. The other accessibility products listed above are not considered by BREEAM guidance.
  • Consider what is happening with the sizes of wheelchairs and mobility scooters. Think about the challenges these may pose for lifts, are they large enough to accommodate these types of products? Look at building solutions to avoid mobility scooter impacts on lift landing doors.

Want to learn more? Don’t miss our free seminar programme at LIFTEX addressing these issues.

Posted in

RECENT NEWS

J & L

The Elevator Pitch: 60 seconds with John Harding, Managing Director, J & L Elevator Components

Founded in 2004, J&L Elevator Components Ltd is a leading supplier of high-quality lift equipment for use in new lift design and the modernisation of existing lifts.

Read More
Dave Cooper

Speaker spotlight: 60 seconds with Dave Cooper, Managing Director, LECS UK

Tell us about your background, how did you get into the industry? I have been in the lift & escalator…

Read More

The Elevator Pitch: 60 seconds with Panos Chadoudis, Managing Director KLEEMANN Lifts UK

Founded in 1983 in Kilkis, Greece, KLEEMANN is one of the major lift companies in the European and global market. Its distribution network expands to more than 100 countries, with a local presence in 15 of them.

Read More
lift guidance

How to make sure your lifts remain safe and operable

Lifting equipment used by an employee at work is subject to regulations which require it to be maintained and have periodic thorough examinations to ensure its safety for users.  

Read More